|
A buyer in the Consumer Products industry located in Rancho Palos Verdes, California United States  successfully sourced for the Machining of a part called Heat Housing on www.MFG.com
Request for Quote Details:
 |
The specific Machining process that was specified is Milling and Turning. |
|
The specified material is Metal-Aluminum. |
|
This RFQ was for 1, 20, and 50 Assemblies. The estimated annual usage is 3,000. |
RFQ Notes:
Production of a heat housing. The buyer’s assembly
consists of 6 separate pieces that all fasten together via
4-48 UNF machine screws. Three of the pieces are similar
in shape and the buyer will refer to these as the inner,
middle, and outer cones. Two of the pieces fit together
and function as a handle. The last piece, which they will
refer to as the base, is the most complex of the six, and
resembles a cylinder with 3 screw holes at the top and a
thin flange in the center. Four of the pieces, which
include the base and 3 Cones, screw together so that the
base is covered by the inner cone, then by the middle
cone, and finally by the outer cone. The two handle
pieces fit together, and then screw on to the outside of
the large cone. In five of the six solid models, there
are several 0.099" holes. Every one of these 0.099" holes
must be a threaded 4-48 UNF. There are 8 threaded holes in
the base, 3 in the inner cone, 4 middle cone, 2 in the
bottom handle, 2 in the top handle, and none in the outer
cone. The tolerance required for all six of the pieces is
plus or minus 0.005”, with the exception that the screw
holes must be accurate enough so that all pieces can
easily screw together, and the seam between the handle
pieces is smooth. All of the pieces must receive a thin
clear coat type II anodized layer that is food grade
safe. The machining finish on the pieces is not
important, with the exception that the handle pieces, the
base, and the large cone are free of defects, such as
dents or other cosmetic flaws. NOTE: Please quote from the
attached SAT files and assembly images.
This RFQ was awarded online at www.MFG.com to a Machine Shop in TAICHUNG CITY , T'ai-wan Taiwan  .
The annualized value of this RFQ was $2,293,862 USD to a Machine Shop who is a member of the www.MFG.com service.
About MFG.com
MFG.com is an online marketplace servicing the manufacturing community. Headquartered in the United States, MFG.com instantly and intelligently matches buyers with suppliers of manufactured parts across the globe, greatly expanding business opportunities for both. MFG.com is transforming the once-fragmented world of manufacturing into a single, on-demand service, enabling products to be sourced and built more easily, quickly, inexpensively, and at higher quality levels. For more information, please visit www.MFG.com.
|
