Cortex Design is a product design firm located in Toronto's burgeoning art and design district. We design new products, create working prototypes, and provide both onshore and offshore manufacturing for our clients looking to launch new product ventures. We use a cross disciplinary, systematic approach for each client's project that delivers quick, creative results. If you have a product idea but do not know how to produce it, give us a call. We provide concepts sketches, CAD models, renderings, prototypes, production drawings, and manufacturing support across a huge variety of industries.
view MfgProfile
We are a production fabrication and manufacturing job shop. We specialize in design and fabrication of Returnable Shipping & W.I.P. racks, containers, dunnage, bins and baskets.
view MfgProfile
At Paulin Technologies we specialize in high speed machining of parts from prototypes up to production levels. Using specialized in-house machining and fixturing techniques along with superior programming, we can provide excellent quality and turnaround on both simple and complex parts. We do work in a variety of materials from stainless steel, carbon steel, and aluminum to natural materials like wood and shell to advanced composites.
We service the aerospace prototyping, thermoforming, and high-precision components industries as well as providing manufacturing and design back-end services for consumer products producers. We have special capability when it comes to small and detailed parts as we use micro-size cutters on a weekly basis in high-speed spindles on a variety of materials. We also have expert fixture design capabilities in-house, so we can spend more time machining and less time on setups.
Our customers' successes are our successes.
view MfgProfile
Located in Belleville, Ontario, Canada, The Machining Center Inc. (TMC) provides full-service, custom machining and fabrication to a diverse customer base. TMC was established in 1988 and is staffed with a knowledgeable and professional workforce. With a broad range of in-house capabilities, including but not limited to, manual milling, turning, drilling as well as CNC milling (including 4th axis) , CNC turning, welding, 3D design & 3D digital scanning, The Machining Center is able to satisfy client requirements from product inception through to final machining or fabrication. TMC recently reached two new milestones by celebrating its 20th year in business as well as becoming ISO 9001:2000 registered.
TMC utilizes a 10,000 sq. ft. shop comprising of a 5,000 sq. ft. Machine Shop and a 5,000 sq. ft. Fabrication Shop. The shop is set up as a low-run production shop (typically 1 to 200 pieces) with an emphasis on specialized application design and manufacturing. TMC is versatile enough to work with its clients, utilizing knowledge and experience to provide feedback and advice to customers to help optimize and improve their designs. The Machining Center’s capabilities include:
-Personalized service
-Custom Machining & Fabrication
-Specialized application design and manufacturing (i.e. custom machinery)
-2D & 3D Drawing services
-CNC machining and prototyping
-Maintenance machining and fabrication
-Maintenance, repairs and installation
-Component rebuilding and reverse engineering including 3-Dimensional Scanning
-Heat treatment and hardness testing
-Specialty Welding
-Solidworks - (3D software for single parts, assemblies, drawings, etc)
view MfgProfile
Qsine specializes in the design and manufacturing of custom machinery. We use 3D CAD to design fabricated and machined products. With in-house metal working tools like:
Machine Shop:
Okuma MacTurn 250W 9-Axis Mill/Turn Center
Okuma 40x20x20 CNC vertical machining center
16" & 13" manual engine lathes
Bridgeport milling machine
The Macturn is a very recent addition. It has a 10" main and 9" sub chucks, 188 tools, in process probing and an automated robotic loader/unloader and a plethora of other productivity options to handle the most demanding jobs. We are using Esprit from DP Technologies to program this complex machine. As strange as it may sound, this is the first and only turning machine in our shop. Hence, it is difficult to for us to justify running pure turned parts in our shop. If you think this machine can help produce your difficult parts, please contact us and we can discuss this machines capabilities in detail.
Fabrication & Welding:
Accupress 175 ton x 12' brake
Accushear 12' x 1/4 shear
Pulsed Mig Welder to 450 Amps
Hi-Frequency Water Cooled Tig to 350 Amps
Omni-Direction 500 lb Weld Positioner
We have the ability to design and manufacture a broad range of products that combine fabrication, machining, hydraulics and electronics.
For fabrication, we mostly work in steel and aluminum but we can do industrial stainless also. Our niche is medium duty, short-run, sheetmetal work in the 14 Ga. to 1/2 range. We do light skid work and a lot of mobile equipment. We do not do HVAC, heavy structural nor high production.
In the machine shop we mainly work in steel, aluminum and ductile iron but we can work with most any material required. Again, we focus on short run, medium size work. We can run very small detailed parts with features down to about 0.015". We are not setup for micro work (less than 0.001"), oversize work nor high line-production type work.
On the design side, we can design mechanical, hydraulic and electronic systems:
Mechanically we are strong with machine design; press formed, sheet metal layout; and light structural design. We normally do not do structural work, standards based engineering or man-lifts and associated equipment.
Hydraulically, we generally get involved with high performance systems requiring finesse in the controls. Hydraulic integrated circuits (both design and manufacturing) is one of our specialties.
Electronically we design and build custom industrial controls. Mostly in the way of signal conditioners such as amplifiers for reading sensors or driving actuators from digital circuits. We mainly work in the realm of 8 bit microcontrollers laying out single layer circuit boards and developing firmware for the application. The majority of our electronic control systems in the past have been electronic over hydraulic controls.
Ultraflo Systems Inc. has over 40 years of Machining, prototyping, assembly, design and fabrication experience. With clients world wide, we have the ability to service any industry. Metal, Plastics and Fiberglass machining and fabrication are our specialty. We have a full assembly shop for cutting, gluing, welding and repairs. Our experienced engineering team can assist you at the early stages of any project.
We are a custom machine and automation equipment manufacturer. We have a fully staffed engineering department, machine / fabrication shop and machine assembly department. We routinely design, engineer and manufacture machinery for a wide range of industries as well as supply precision machined components to our customers. Our engineering department has been supplying cutting edge designs and solutions for over 18 years. Our machine shop is experienced in machining a wide range of metals and plastics and can work from a 3D model or a paper drawing. Our assembly department is highly skilled in assembling, testing and commissioning precision automation equipment. We also design, build and program all of our own control panels and electrical / pneumatic circuits.
Our machinery meets all applicable safety standards. We integrate many brand names of PLC's, servos and drives including Allen Bradley ControlLogix and CompactLogix. We utilize SolidWorks for 3D modeling, part and assembly details and use AutoCad for 2D concepts, electrical/pneumatic drawings and plant layouts. Our machine shop utilizes SolidCam, CNC G-code and CNC Conversational.
view MfgProfile
Quality, Innovation, Excellence
We specialize in CNC machining of precision parts for today's high technology industries. We are Small Part Specialists with a focus on pieces less than 3/4"(approx. 20.0mm) in diameter. From prototypes to production runs we are your one source supplier.
We are capable of tolerances +/-.0001"(.0025mm) and have produced parts with turned diameters as small as .006"(0.15mm) and drilled holes down to .004"(0.1mm)
Our capabilities include CNC Swiss-turning with up to 7-axis of control. Complex parts requiring milling, turning and C-axis machining are efficiently produced with a focus on quality and value to our customers.
Free Force Machining Technology is committed to Zero Percent Defect Production. We are ISO 9001:2000 certified.
Small Part Specialists with a focus on miniature components and ultra-precision turned parts less than 1/2"(12.7mm) in diameter.
Utilizing cutting edge technology with an emphasis on lean manufacturing and continuous process improvement, we stand ready to deliver on your toughest requirements. We are capable of tolerances +/-.0001"(.0025mm) and have produced parts with turned diameters as small as .006"(0.15mm) and drilled holes down to .004"(0.1mm)
Strict quality control and complete traceability of materials, processes and suppliers ensure that your parts are produced exactly to your specifications. RoHS and DFARs compliant material available as standard items.
International shipping and Customs clearing experience compliment our manufacturing knowledge.
Over 15 years experience in Swiss-turning and dedication to outstanding Customer Service. We look forward to being of service to you.
Please contact us today at info@freeforceinc.com
view MfgProfile
GMP Custom Machining Ltd (est. 1999) specializes in manual and CNC machining services for the oil and gas industry. With 55 years of experience in the industry we are capable of handling the toughest of tasks from prototypes to mass production.
view MfgProfile
How does this work?)
view MfgProfile
To find additional Industrial Designers click here...