N.O.W & Associates has been providing fabrication,machining and assembly services to Industry for 40 years. With CSA Z299.3 and ISO 9001 - 2000 Quality Management Systems, and highly skilled craftsman, we are able to offer reliable, high quality products with exceptional customer service.
Our spectrum of products ranges from mild steel fabrications and machined components to complete machines in Titanium and Stainless Steel. Our main activities are in the production of Wire and Cable Machinery, Chemical Filtration Machinery for the Pulp and Paper Industry, Recycling Machinery, the Steel Industry, and Nuclear Components and Tooling. We are certain that the disciplines required to serve these industries would enable us to provide you with the same level of quality and service.
view MfgProfile
Located in Belleville, Ontario, Canada, The Machining Center Inc. (TMC) provides full-service, custom machining and fabrication to a diverse customer base. TMC was established in 1988 and is staffed with a knowledgeable and professional workforce. With a broad range of in-house capabilities, including but not limited to, manual milling, turning, drilling as well as CNC milling (including 4th axis) , CNC turning, welding, 3D design & 3D digital scanning, The Machining Center is able to satisfy client requirements from product inception through to final machining or fabrication. TMC recently reached two new milestones by celebrating its 20th year in business as well as becoming ISO 9001:2000 registered.
TMC utilizes a 10,000 sq. ft. shop comprising of a 5,000 sq. ft. Machine Shop and a 5,000 sq. ft. Fabrication Shop. The shop is set up as a low-run production shop (typically 1 to 200 pieces) with an emphasis on specialized application design and manufacturing. TMC is versatile enough to work with its clients, utilizing knowledge and experience to provide feedback and advice to customers to help optimize and improve their designs. The Machining Center’s capabilities include:
-Personalized service
-Custom Machining & Fabrication
-Specialized application design and manufacturing (i.e. custom machinery)
-2D & 3D Drawing services
-CNC machining and prototyping
-Maintenance machining and fabrication
-Maintenance, repairs and installation
-Component rebuilding and reverse engineering including 3-Dimensional Scanning
-Heat treatment and hardness testing
-Specialty Welding
-Solidworks - (3D software for single parts, assemblies, drawings, etc)
view MfgProfile
Manufacture Adria
A young and dynamic team supervised by people of experiment. By concern with equity towards our employees and our customers, we follow the principles relating to the human rights, the standards of work and the environment.
Honesty, the integrity and fairness guide us in all circumstances the decisions and procedures of our company.
The nature even of our services calls with the greatest conscientiousness. It must in particular result in a high level to know to make and vigilance without matter fault of safety and quality.
Registered ISO 9001-2000, at Adria we act towards our employees and customers in the respect of their private life. We observe neutrality with regard to the political, ethnic, social or religious opinions
Our objective is clear and simple: To do our work at it’s best.
In this matter, our installations, the equipment and our expertise enable us to treat the most demanding requests.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------
Manufacture Adria
Une équipe jeune et dynamique supervisée par des gens d’expérience. Par soucis d’équité envers nos employés et nos clients, nous suivons les principes relatifs aux droits de l’homme, aux normes du travail et de l’environnement.
L’honnêteté, l’intégrité et la loyauté gouvernent en toutes circonstances les décisions et procédures de notre entreprise.
La nature même de nos services appelle à la plus grande conscience professionnelle. Elle doit en particulier se traduire par un haut niveau de savoir-faire et une vigilance sans faille en matière de sécurité et de qualité.
Enregistré ISO 9001-2000, chez Adria nous agissons envers nos employés et clients dans le respect de leur vie privée. Nous observons la neutralité à l’égard des opinions politiques, ethniques, sociales ou religieuses.
Notre objectif est clair et simple : Bien faire notre travail.
Et pour ce faire, nos installations, l’équipement et notre expertise nous permettent de traiter les demandes des plus exigeantes.
view MfgProfile
Qsine specializes in the design and manufacturing of custom machinery. We use 3D CAD to design fabricated and machined products. With in-house metal working tools like:
Machine Shop:
Okuma MacTurn 250W 9-Axis Mill/Turn Center
Okuma 40x20x20 CNC vertical machining center
16" & 13" manual engine lathes
Bridgeport milling machine
The Macturn is a very recent addition. It has a 10" main and 9" sub chucks, 188 tools, in process probing and an automated robotic loader/unloader and a plethora of other productivity options to handle the most demanding jobs. We are using Esprit from DP Technologies to program this complex machine. As strange as it may sound, this is the first and only turning machine in our shop. Hence, it is difficult to for us to justify running pure turned parts in our shop. If you think this machine can help produce your difficult parts, please contact us and we can discuss this machines capabilities in detail.
Fabrication & Welding:
Accupress 175 ton x 12' brake
Accushear 12' x 1/4 shear
Pulsed Mig Welder to 450 Amps
Hi-Frequency Water Cooled Tig to 350 Amps
Omni-Direction 500 lb Weld Positioner
We have the ability to design and manufacture a broad range of products that combine fabrication, machining, hydraulics and electronics.
For fabrication, we mostly work in steel and aluminum but we can do industrial stainless also. Our niche is medium duty, short-run, sheetmetal work in the 14 Ga. to 1/2 range. We do light skid work and a lot of mobile equipment. We do not do HVAC, heavy structural nor high production.
In the machine shop we mainly work in steel, aluminum and ductile iron but we can work with most any material required. Again, we focus on short run, medium size work. We can run very small detailed parts with features down to about 0.015". We are not setup for micro work (less than 0.001"), oversize work nor high line-production type work.
On the design side, we can design mechanical, hydraulic and electronic systems:
Mechanically we are strong with machine design; press formed, sheet metal layout; and light structural design. We normally do not do structural work, standards based engineering or man-lifts and associated equipment.
Hydraulically, we generally get involved with high performance systems requiring finesse in the controls. Hydraulic integrated circuits (both design and manufacturing) is one of our specialties.
Electronically we design and build custom industrial controls. Mostly in the way of signal conditioners such as amplifiers for reading sensors or driving actuators from digital circuits. We mainly work in the realm of 8 bit microcontrollers laying out single layer circuit boards and developing firmware for the application. The majority of our electronic control systems in the past have been electronic over hydraulic controls.
Falcon Tool & Mould was established in 1979. We own a 10,000 sq ft building to carry on our business. Our capabilities are as follows - production of stamping dies, single, compound, hand transfer, and progressive dies up to 78 inches in length , up to maximum tonnage of 200 - Prototyping of many various parts - small to medium production runs - Custom machining and turning - Fixturing for Assemblies both manual and automatic - Custom designed machinery with computer controlled electronics - Plastic injection moulds, die cast and compression moulds
view MfgProfile
We are a custom machine and automation equipment manufacturer. We have a fully staffed engineering department, machine / fabrication shop and machine assembly department. We routinely design, engineer and manufacture machinery for a wide range of industries as well as supply precision machined components to our customers. Our engineering department has been supplying cutting edge designs and solutions for over 18 years. Our machine shop is experienced in machining a wide range of metals and plastics and can work from a 3D model or a paper drawing. Our assembly department is highly skilled in assembling, testing and commissioning precision automation equipment. We also design, build and program all of our own control panels and electrical / pneumatic circuits.
Our machinery meets all applicable safety standards. We integrate many brand names of PLC's, servos and drives including Allen Bradley ControlLogix and CompactLogix. We utilize SolidWorks for 3D modeling, part and assembly details and use AutoCad for 2D concepts, electrical/pneumatic drawings and plant layouts. Our machine shop utilizes SolidCam, CNC G-code and CNC Conversational.
view MfgProfile
FLM Technology, Inc. is a precision CNC Machine shop located in Ontario, Canada. We’ve been in business for 15+ years and offer many years of experience including general machining, tool and die making, and certified mechanical engineering. Primarily serving the Automotive industry, our specialty is fixture and special purpose machine building.
Our equipment includes well maintained manual and CNC machines and we use Solidworks and AutoCAD for engineering, prototypes and data transfer. Our quality is top of the line and we do provide inspection reports. When it comes to the right product at the right price and time, FLM should be your first stop. We provide quality on time deliveries, maintain excellent working relationships with our customers as most of them are repeat clients, and will promise to communicate to keep you informed on your orders. Please contact us today for more details!
view MfgProfile
Progressive Automated Systems designs, manufactures and integrates custom automation systems for all industries. Therefore, our Progressive Machining Division understands your requirements and is able to provide high quality, accurate components for all your manufacturing needs.
Our goal is to develop solid relationships with our customers which will lead to repeat business.
Located in Kitchener, Ontario, Canada, we employ 45 skilled employees in a 25,000 square foot facility.
Systems installed throughout North America and the UK.
Over 20 sales and support representatives throughout the United States and Canada.
view MfgProfile
How does this work?
view MfgProfile
To find additional Custom Equipment Builders click here...